Scope of use of plastic inspection wells

作为环保材料之一的塑料检查井的应用是非常广泛的，但是却也不是每个地方都能使用的，要满足一定的条件才能够保证塑料检查井起到应有的作用。那么哪些是满足塑料检查井的使用条件呢？

As one of the environmental protection materials, the application of plastic inspection wells is very extensive, but it can not be used in every place. To meet certain conditions, it can guarantee the function of the plastic inspection well. So what are the conditions to meet the requirements of plastic inspection wells?

其一，建筑小区、城乡市政、工业园区、旧城改造等范围内埋地塑料排水管道外径不大于1200mm、埋设深度不大于8m的塑料排水检查井工程的设计、施工和维护保养。

First, the design, construction and maintenance of the plastic drainage inspection well is not more than 1200mm and the buried depthwww.yanbianyanglao.cnwww.yanbianbanjia.com.cn www.zidongmeny.cn www.baosuruanguan.net.cn www.gaoyajiaoguan.com.cn www.jiaozhujii.cn is not more than 8m in the area of building, urban and rural municipal, industrial park and old city reconstruction.

其二，一般土质、软土土质、季节性冻土土质和湿陷性黄土土质条件下的塑料排水检查井施工。

Secondly, the construction of plastic drainage well for general soil, soft soil, seasonal frozen soil and collapsible loess soil.

再者就是在一些抗震设防裂度为9度及9度以下的地区。还有就是一般车道的地面荷载按汽车总重15t（后轮压5t）；消防车道的地面荷载按汽车总重30t（后轮压6t）设计和地下水位按地面下不高于1.0m设计。满足上面这一些的要求的地方，均可以使用塑料检查井。

Furthermore, there are areas where the seismic fortification degree is below 9 degrees and below 9 degrees. The ground load in the general lane is based on the total weight of 15t (back wheel pressure 5T); the ground load of the fire lane is designed according to the total weight of the car 30t (the rear wheel pressure 6T) and the ground water level is not more than 1.0m under the ground. Plastic inspection wells can be used to meet the above requirements.